Product Assembly
Item No.: CG0142-001 (Mud Removal), CG0842-001 (Chain Cover)
Assembling Wage: 500 (Mud Removal), 500 (Chain Cover)
Compatible Models: miniu
Assembling Instruction: Video Link
Remarks: It is recommended to return to the factory for assembly.
ㄧ, parts and preparation tools
No. 8 open end wrench, Phillips screwdriver, No. 3 hexagonal wrench, No. 5 hexagonal wrench
Follow the installation steps to DIY
Chain cover installation method
USE A PHILLIPS SCREWDRIVER TO THREAD THE A1 SCREW THROUGH BRACKET A AND LOCK IT IN THE LOCK HOLE UNDER THE FRAME.
Title
USE A PHILLIPS SCREWDRIVER TO THREAD THE A1 SCREW THROUGH BRACKET B AND LOCK IT IN THE LOCK HOLE ABOVE THE FRAME TEE.
Title
PLACE THE WOOD MASTIC ON TOP AND USE A PHILLIPS SCREWDRIVER TO LOCK THE A3 SCREWS THROUGH THE A7 SPACER AND WOOD MASTIC IN THE BRACKET A AND BRACKET B LOCKING HOLES.
Title
BRACKET C AND BRACKET D USE A PHILLIPS SCREWDRIVER TO THREAD THE A 2 SCREWS THROUGH THE BRACKET LOCK HOLES AND LOCK TOGETHER.
Title
USE A PHILLIPS SCREWDRIVER TO THREAD THE A1 SCREWS THROUGH THE COMBINED BRACKETS C + D AND LOCK THEM IN THE LOCKING HOLES ON THE INSIDE OF THE REAR UPPER FORK.
Title
USE A PHILLIPS SCREWDRIVER TO LOCK THE A3 SCREWS THROUGH THE A7 SPACER AND THE WOOD MASTIC TO THE BRACKETS C + D.
Title
Complete the installation.
Front Mud Removal Method
Use a #5 Allen wrench to remove the front brake clamp set screws, place a wooden front mud remover, and re-lock the set screws back in place.
Title
USE A #3 ALLEN WRENCH TO THREAD THE A5 SCREWS THROUGH THE ㄇ LEFT AND RIGHT BRACKETS TO LOCK ONTO THE FORK LOCK HOLES AND LOCK.
Title
USE A PHILLIPS SCREWDRIVER TO THREAD THE A4 SCREWS THROUGH THE A7 SPACER AND WOOD MASTIC WITH THE MOUNTED BRACKET R-SNAP LOCK HOLES, AND USE A #8 OPEN END WRENCH TO HOLD AGAINST THE A2 NUT AND LOCK IT IN PLACE.
Title
Complete the installation.
Back Mud Removal Method
USE A #5 ALLEN WRENCH TO THREAD THE A8 SCREW THROUGH THE MUD REMOVER LOCK HOLE, LOCK THE REAR UPPER FORK LOCK HOLE IN PLACE AND TIGHTEN.
Title
USE A #3 ALLEN WRENCH TO THREAD THE A5 SCREWS THROUGH THE REAR HOOK AND CLAW LOCKING HOLES ON THE LEFT AND RIGHT BRACKETS AND TIGHTEN THEM.
Title
USE A PHILLIPS SCREWDRIVER TO THREAD THE A4 SCREWS THROUGH THE A7 SPACER AND WOOD MUD REMOVAL AND MOUNTING BRACKET R-SNAP LOCK HOLES, USE A #8 OPEN END WRENCH AGAINST THE A2 NUT AND LOCK.
Title
Complete the installation.
